Rane SIXTY-EIGHT Manual del operador descargar pdf (Pagina 55)

Fader Assembly Removal

1 Remove all ve fader knobs.

2 Remove all four screws holding the

fader panel face plate.

3 Lift up the fader panel face plate and

set it aside where it can’t get damaged.

4 Remove the two screws in the main

panel at the top of the fader assembly.

5 Remove the two screws at the front of

the fader assembly.

6 Slide the fader assembly out just

enough to see the three white and blue

wires and their connectors.

7 Unplug the connectors of the three

white and blue wires.

8 Slide out the fader assembly

completely.

9 The channel faders are mounted in

pairs. Remove the four screws for each

pair of faders (1 and 2) or (3 and 4).

0 The magnetic crossfader may be

removed by the two screws at each end

of the crossfader.

Reverse this procedure to re-assemble.

• Plug in all three cables before installing

screws.

• Conrm cables are not crossed, with

faders 1 & 2 on the left connector, faders

3 & 4 on the right connector, and the

blue crossfader wires in the center.

• Test all the faders before installing the

fader panel face plate and fader knobs.

RANE SIXTY-EIGHT MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4

1 2 ... 50 51 52 53 54 55 56 57 58 59 60

Sin comentarios

Rane SIXTY-EIGHT Manual del operador Pagina 55