Rane MP 24Z Instrucciones de operaciones descargar pdf (Pagina 4)

Manual-4

REAR PANEL DESCRIPTION

햲 BALANCED MAIN OUTPUT connectors: Provide a fully balanced Main Output signal—pin 2 is (+), pin 3 is (–) and pin

1 is signal ground. Pin 3 must never be grounded for unbalanced operation. Use only pin 2 as hot and pin 1 as return for

any unbalanced operation.

햳 UNBALANCED MAIN OUTPUT connectors: Provide MAIN OUTPUT signals on ¼" TS (tip-sleeve) unbalanced

connections.

햴 BOOTH OUTPUT connectors: The Left Output only supplies a mono BOOTH monitor Output; connecting to both Left

and Right provides a stereo Output.

햵 ZONE OUTPUT connectors: The Left Output only supplies a mono ZONE OUTPUT, connecting to both Left and Right

provides a stereo Output. The Zone Outputs are located Post-EQ, which includes the Microphone Output. An internal

jumper block programs the Zone to Pre-EQ (and no mic) if required. (See Service Information on page Manual-9.)

햶 MAXIMUM OUTPUT GAIN REDUCTION control: Decreases the maximum Level of the balanced and unbalanced

MAIN OUTPUTS of the MP 24z as it is rotated CCW.

햷 METER SENSITIVITY ADJUST: Clockwise rotation decreases the full-scale sensitivity of the PEAK PROGRAM

METER, as indicated by the full-scale voltage calibrations around the control.

햸 SYSTEM MONO/STEREO switch: Engaging this pushbutton converts all Outputs (except tapes and loops) to MONO,

regardless of the nature of the Input signals.

햹 EQ RANGE switch: In the out position, the maximum boost/cut available from the Program Equalizer is ±8 dB. In the

switch’s in position, this range is reduced to ±4 dB.

햺 LIGHT CONTROL OUTPUT jack: Provides a transformer-coupled mono program signal for use by a lighting

controller’s trigger input. This is a balanced ¼" output—the tip is positive, the ring is negative and the sleeve is floating.

햻 LIGHT OUTPUT LEVEL attenuator: Counter-clockwise rotation reduces the Output Level at the LIGHT CONTROL

OUTPUT jack.

1 2 3 4 5 6 7 8 9

Sin comentarios

Rane MP 24Z Instrucciones de operaciones Pagina 4