Rane SP 15 Manual del operador descargar pdf (Pagina 11)

2. The six effect buttons both turn on and

sync an internal effect. By keeping this

separate from the effects ON button,

it is possible to turn on, sync and cue

effects before you hear the Wet signal

in the Main Mix. Only one internal

effect is selected at a time. Having six

independent buttons, it is possible

to drum in different effects without

interruption.

3. ExT. INSERT is turned on/off with a

separate button. The external analog

insert can be used with internal effects

and the

INSERT or independently.

NOTE: If no external connection is

made to the FLExFx LOOP RETURN jack, the

signal will be interrupted when the ExT.

INSERT button is turned on.

4. The

INSERT is turned on/off with

a separate button, and can be used

with internal effects, the ExT. INSERT or

independently. The

INSERT uses

USB record pair 9-10 for the Send and

USB playback pair 7-8 for the Return.

Using the

INSERT generally requires

a low latency setting. NOTE: Assign a

PGM channel or signal to FLExFx before

engaging the

INSERT button to

avoid audible artifacts.

When two USB ports are in use, the SP-6

ASSIGN button at the top of each control

strip determines which computer the SP-6

player controls are assigned to. Audio

from both USB ports is summed in the

mixer. See “SP-6 Sample Player” on

page 28.

FlexFX

The FlexFX Bus in the Sixty-Two works

differently than a typical effects insert

loop. This architecture is very exible

and opens up many new possibilities not

possible with simple effect insert designs

found on other mixers.

The FlexFX Bus is more like an auxiliary

bus that can have multiple signals

assigned to it. Signals assigned to the bus

may then have internal effects, external

analog effects and external USB effects

applied in any combination. The order of

processing in the FlexFX Bus is shown in

the graphic below.

1. FLExFx buttons for PGM 1, PGM 2, MIC and

AUx assign signals to the FlexFX

Bus (BRIGHT BLUE) or the Main Mix

(DIM BLUE). This allows assigning

multiple inputs to the FlexFX Bus and/

or changing the assignment without

interrupting audio.

FLEXFXPGM 1

1 2 3 4

6

5

FLEXFXPGM 2

FLEXFXMIC

FLEXFXAUX

10

8

64

2

0

DEPTH

FILTER

EFFECTS ENGINE

EXT. INSERT

SEND

TAP

PHASERFLANGER

ROBOTECHO REVERB

FLANGER +FB

BPM:120 * 4:1

2000 MS

ON

FLEXFX ON

BYPASS

ON

RETURN

SEND

LEFT

RIGHT

RETURN

LEFT

RIGHT

SEND

RETURN

USB

Record

USB

Playback

Main

Mix

INSERT

Cue

Bus

CUE

TIME BEAT

In the setup screen, both DJ-FX and

Enable Mixer DJ-FX Send must be

checked to use the

INSERT button.

See “Enable DJ-FX” on page 45,

and “Enable Mixer DJ-FX Send” on

page 45.

NOTE: If no connection is made in

Scratch Live between the USB send

and USB return or “Enable Mixer DJ-

FX send” is not checked in Scratch

Live, the signal will be interrupted

when the

INSERT button is turned

on.

5. The FlexFX CUE is after the internal

effects insert, analog external insert,

USB insert and before the effects ON

function. This allows cueing a Wet signal

while listening to the Dry signal before

turning the effect ON.

6. When effect ON is not engaged, internal

effects insert, analog external insert and

USB insert points are bypassed, and

any signal assigned to the FlexFX Loop

is simply summed into the main mix.

This allows you to CUE the Wet signal

before the Wet signal is heard in the

Main Mix.

RANE SIXTY-TWO MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.5.0

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Comentarios a estos manuales

Sin comentarios