Rane TTM 57SL Manual del operador Pagina 53

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 52
RANE TTM 57SL MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4
53
RECORD BURN - This section of the control
vinyl has been worn. Swap sides or use
the track start offset.
LEFT CHANNEL MISSING - The signal from
the needle is not reaching the TTM 57SL.
Check the cable and cartridge wiring.
RIGHT CHANNEL MISSING - The signal from
the needle is not reaching the TTM 57SL.
Check the cable and cartridge wiring.
BAD RECORD BURN - Your record is worn and
Scratch Live is unable to track correctly.
Swap sides or get new vinyl ASAP.
LEFT CHANNEL IS NOISE - Left signal has
been lost with a noisy loose connection.
RIGHT CHANNEL IS NOISE - Right signal has
been lost with a noisy loose connection.
TONEARM IS SLIGHTLY TOO LIGHT -
Susceptible to dust and vibration. Adjust
the tonearm.
SIGNALS ARE SUMMING TO MONO - The left
and right signals have been combined into
one somewhere in your signal chain.
RIGHT CHANNEL IS INTERFERENCE - Right
signal has been lost with a noisy loose
connection and left channel crosstalk.
Vista de pagina 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60

Comentarios a estos manuales

Sin comentarios