Rane SL 3 Manual del operador descargar pdf (Pagina 39)

RANE SL3 FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.5.0

RECORD BURN - This section of the

control vinyl has been worn. Swap sides

or use the track start offset.

LEFT CHANNEL MISSING - The signal

from the needle is not reaching the SL3.

Check the cable and cartridge wiring.

RIGHT CHANNEL MISSING - The signal

from the needle is not reaching the SL3.

Check the cable and cartridge wiring.

BAD RECORD BURN - Your record is

badly worn and Scratch Live is unable to

track. Swap sides or get new vinyl ASAP.

LEFT CHANNEL IS NOISE - Left

signal has been lost with a noisy loose

connection.

RIGHT CHANNEL IS NOISE - Right

signal has been lost with a noisy loose

connection.

TONEARM IS SLIGHTLY TOO LIGHT -

Susceptible to dust and vibration. Adjust

the tonearm.

SIGNALS ARE SUMMING TO MONO -

Left and right signals have been combined

into one somewhere in your signal chain.

RIGHT CHANNEL IS INTERFERENCE

Right signal is lost with a noisy loose

connection and left channel crosstalk.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Sin comentarios

Rane SL 3 Manual del operador Pagina 39